3D Modelling

Course Title: Training Course on Parametric 3D Modelling - (DM-INPT01)
Target group: Engineers, Mould Designers, Technical Officers, Product Developers, CNC Machine Operators, Lecturers, Instructors, Technical College Students, School Leavers*
Entry requirement:
  • Candidates that possess G.C.E. A/L, equivalent (SLQF L2 or NVQ L4), or higher qualification 
  • Candidate with pending G.C.E. A/L or equivalent results*
  • Knowledge of 2D Computer-aided draughting, 3D Computer-aided Modelling, and  Engineering, and technical drawings is an added advantage

* conditions apply
Duration: 10 weeks (Part-time)
Lectures - Sunday
Hands-on - Sunday
Schedule: Lectures, assignments, hands-on sessions & a project.
Group size: 30 - 60 participants
Course Fee: Rs. 45,000/=
Commence on: Sunday the 18th of February 2024
Apply before: Tuesday the 06th of February 2024

Application Procedure

Application form can be downloaded from here OR obtained from the Director, Die & Mould Facilitation and Development Centre, Department of Mechanical Engineering, University of Moratuwa, Katubedda, Moratuwa by sending a self-addressed stamped envelope 100 x 225 mm² in size OR sending an email to the Director.

Note: Duly filled applications and copies of the Professional/Technical Certificates ONLY should be forwarded to the Course Coordinator. Please write the Course Title clearly on the left-hand top corner of the envelope.

Submit your contact information from here.

More information about this course can be obtained from here.

Mr. K.H. Janaka Mangala

Director,

Die and Mould Facilitation and Development Centre,

Department of Mechanical Engineering, University of Moratuwa,

Moratuwa 10400.

 

Phone: 076 923 6451 (Janath), 077 369 9056 (Janaka) 

+94 11 2650301 / +94 11 2650340 / +94 11 2640460 (Ext: 4535 / 4500 / 4534 / 4559)

Fax: +94 11 2650622 (Please insert  “ATTN: Dept. Mech. Eng. Die and Mould Centre”)

Email: janathp71@gmail.com,  janaka@uom.lk

Copyright © 2024 University of Moratuwa.  All rights Reserved.