|Course Title:||Training Course on CNC Part Programing using SOLIDCAM or PRO ENGINEER or SIEMENS NX|
|Target group:||Engineers, Mould Designers, Product Developers, Technical Officers, CNC Machine Operators, Lecturers, Instructors, Technical College Leavers|
|Entry requirement:||Basic knowledge of Parametric Solid Modelling (preferably PRO/ENGINEER and/or SOLIDWORKS) and Engineering/Technical Drawing.|
|Duration:||10 weeks (Part-time)
Lectures - Sunday
Hands-on - Sunday
|Schedule:||Lectures, assignments, hands-on sessions & a project.|
|Group size:||10 - 15 participants|
|Course Fee:||Rs. 52,000/=|
|Commence on:||Contact course coordinator for commencement dates|
|Apply before:||Contact course coordinator for application deadline|
Application form can be downloaded from here OR obtained from the Director, Die & Mould Facilitation and Development Centre, Department of Mechanical Engineering, University of Moratuwa, Katubedda, Moratuwa by sending a self-addressed stamped envelope 100 x 225 mm² in size OR sending an email to the Director.
Note: Duly filled applications and copies of the Professional/Technical Certificates ONLY should be forwarded to the Course Coordinator. Please write the Course Title clearly on the left-hand top corner of the envelope.
More information about this course can be obtained from here.
Course Coordinator / Director (Die and Mould Facilitation and Development Centre)
Die & Mould Facilitation and Development Centre
Address: Department of Mechanical Engineering, University of Moratuwa, Katubedda, Moratuwa.
Phone: +94 11 2650301 / +94 11 2650265 / +94 11 2650340 / +94 11 2640460 (Ext: 4535 / 4500 / 4534 / 4559)
Fax: +94 11 2650622 (Please insert “ATTN: Dept. Mech. Eng. Die and Mould Centre”)
Mr. IMJ Priyankara (Technical Officer)
Phone: +94 11 2650621 (Ext: 4535)