Course Objectives:
Apply 3D CAD clothing software to simulate different materials, accessories, seams and embellishments. Evaluate the virtual fit, construction and visual appearance using virtual prototypes.
Target Group:
Apparel designers, Fit and Construction engineers in apparel sector, Garment technologists, pattern technologists, lecturers, instructors
Eligibility Requirements:
Attained minimum of ‘S’ pass for each subject (any subject is considered) at GCE A/L Examination AND At least 1 year work experience in an apparel organization or a higher level in academic assignments.
Course Outline:
-
Introduction to 3D clothing CAD systems.
-
Practice avatar morphing in VStitcher.
-
Practice 3D clothing simulation according to different textile materials, accessories, seams, and embellishments.
-
Practice 3D clothing simulation according to different garment construction methods.
-
Explain the standard operation procedures in 3D clothing simulation.
-
Evaluate the virtual fit and discuss relevant improvements to achieve true-to-life appearance.
Duration: 42 hours (6 consecutive Sundays, 7 hours a day
Start Date: 20th October 2024
Performance Criteria:
-
Attendance/Participation requirements: 80% attendance is required.
-
Course assessments: 100% continuous assessments for each module
Award of Grades for Course modules:
Participant should obtain minimum of 40% marks for each practical assignment of each module.
Award of Grades:
|
Final Marks |
Grade |
|
75 to 100 |
Distinction Pass |
|
60 to 74 |
Credit Pass |
|
45 to 59 |
pass |
|
0 to 44 |
Fail |
Participants will normally not be permitted to repeat the continuous assessment or written examination.
Course fee: Rs.45000.00
Full payment should be made before the course commencement.
Candidates will be selected according to their qualifications and availability of placements.
Application forms can be collected from the office of the Department of Textile & Apparel Engineering, Faculty of Engineering, University of Moratuwa or can be downloaded from the following link.
Contact Details :
Course Coordinator
Dr. Jayamali De Silva
Short Course in 3D Clothing Fit Simulation using VStitcher
Department of Textile & Apparel Engineering
University of Moratuwa,
Katubedda, Moratuwa.
Tel: 0112-650301 Ext – 6000/6022/6052
0112-640480 Ext – 6000/6022/6052
Fax: 0112651787
E-mail: tex-cadlab-01@uom.lk
Calling for applications now ...
