Intake 2018 – Project Topics
| Research Project Title | Supervisor (s) |
|---|---|
|
Development of advanced polymer composites using natural resins |
Mr.AMPB Samarasekara |
|
Development of cellulose based nano-fibers by electrospinning techniques |
Mr.AMPB Samarasekara |
|
Development of open-source software for polymer composites analysis |
Mr AMPB Samarasekara |
|
Extraction of natural dyes from selected plant sources and its application in fabrics |
Mr SV Udayakumara |
|
Development of new bio-based adhesive for paper/cardboard |
Mr SV Udayakumara |
|
Preparation and characterization of LDPE based wood-plastic composites reinforced with clay. |
Mr.SV Udayakumara |
|
Preparation Of High-Quality Graphene Oxide From Sri Lankan Vein Graphite |
Dr.HS Sitinamaluwa |
|
Activated graphene oxide for removal of organic pollutant from wastewater |
Dr.HS Sitinamaluwa |
|
Optimization of the Extraction of Nano CaO powder from eggshells for agricultural applications |
Prof. AS Galhenage |
|
Synthesis of Fluoride-Containing Varnish for Application to the tooth surface |
Prof AS Galhenage |
|
Development of petroleum oil quality analyser based on optical metrological techniques |
Dr D Attygalle |
|
Influence of particle size on biocompatibility of hydroxyapatite nanoparticles |
Prof. SU Adikary |
|
Numerical optimization of band gap gadient of CIGS solar cell |
Dr.D Attygalle |
|
Modeling and Simulation of Solid State Micro-pump Based on Piezoelectric Ceramics |
Prof. SU Adikary |
|
Modeling and Simulation of piezoelectric nano generators based on nano wire arrays |
Prof. SU.Adikary |
|
Development of an exhaled breath analyzer for early detection of diseases |
Dr DAS Amarasinghe |
|
Studying the effect of aging temperature and quenching medium on the hardness of AL6063 Alloy. |
Dr.GIP De Silva |
|
Development of low cost bricks using waste foundary dust. |
Dr. GIP De Silva |
|
Estimation of Weibull modulus through ultrasonic velocity measurements |
Mr.V Sivahar |
|
Monitoring of FRP degradation with ultrasound |
Mr. V Sivahar |
|
Dynamic Mechanical Analysis of Elastomers |
Mr.VSC Weragoda |
|
Measurement of effective heat transfer in elastomers |
Mr. VSC Weragoda |
|
Conductive Elastomeric Sensors |
Mr. VSC Weragoda |
|
Numerical Prediction of Curing Status of Graphite based Tire Compounds under Vulcanization |
Dr AAGA Abeygunawardane |
|
Suitability of using Al sludge waste to produce paving block |
Mr.SP Guluwita |
|
Suitability of extracting aluminium from aluminium sludge waste |
Mr. SP Guluwita |
Intake 2017 – Project Topics
| Research Project Title | Supervisor (s) |
|---|---|
|
Characterization of the Deformation and Damage of Biological Soft Tissues for Tissue Engineering |
Dr AAGA Abeygunawardane |
|
Preparation and Characterization of Porous Graphene from Sri Lanka Vein Graphite. |
Dr (Mrs) HS Sitinamaluwa |
|
Development of Nano-Cellulose based Respirator Filters |
Mr AMPB Samarasekara |
|
Quantitative Estimation of Residual Stresses in Quenched Steel through Ultrasonic Parameters. |
Mr V Sivahar |
|
Modelling of Cement - Waste Paper - Natural Fiber based Composite for Ceiling Sheet/Partition Board |
Mr SV Udayakumara |
|
Numerical simulation of Lead-Free bismuth perovskite by using SCAPS (Solar Cell Capacitance Simulator) |
Dr AS Galhenage |
|
Characterization of Viscoelastic Materials by Ultrasonic through Transmission Technique |
Mr V Sivahar |
|
Environmental Corrosion on Structural Steel. |
Eng S.P Guluwita |
|
Nitrogen doped Graphene for Energy Storage |
Dr (Mrs) HS Sitinamaluwa |
|
Modelling, Optimization and Design of Efficient Piezoelectric Energy Harvesting Device to Power Wearable Electronics. |
Prof S.U Adikari |
|
Design and Fabrication of Bi-Axial Tensile Testing Machine to Characterize Polymer Composite. |
Dr AAGA Abeygunawardane |
|
A Cure Monitoring Method Development for Adhesives using Direct Current Resistivity |
Mr.V.S.C Weragoda |
|
Development of Magnetic Tracebility Sensor. |
Dr.D Attygalle |
|
Synthesis of Nano-Calcium Oxide from Eggshell for Dental Applications. |
Dr (Mrs).A.S.Galhenage |
|
Extraction of Copper and Sand from Blasting Sand |
Eng.S.P Guluwita |
|
Study on Plasma based Printability Improvement. |
Dr DAS Amarasinghe |
|
Design of a Bridge Expansion Joint |
Mr.V.S.C Weragoda |
|
Simulation Study on the Effect of Fillers on the Mechanical Properties of Thermoplastics |
Mr SV Udayakumara |
|
Development of Soil Based Composite Wall Panels Using Locally Available Laterite Soil |
Dr. D Attygalle |
|
Design and Optimization of Linear Actuator for Biomedical Applications. |
Prof.S.U Adikari |
|
Characterization of Cu/Ni(Mn) Foil used in Strain Gauge Industry |
Mr.V.S.C Weragoda |
|
Synthesizing and Characterization of Composites with Palmyrah Leaf Petioles as a Construction Materials. |
Eng.S.P.Guluwita |
|
Explore the suitability of M-sand sludge waste in the production of paving blocks and its mix design |
Eng.S.P.Guluwita |
|
Optimization of process parameters to improve the tensile strength of Aluminum alloy 6201 |
Eng.S.P.Guluwita |
Intake 2016 – Project Topics
| Research Project Title | Supervisor (s) |
|---|---|
|
Design of Natural Fiber and Waste Paper Composite using Numerical Analysis Method |
Mr S.V. Udayakumara |
|
Design and Fabrication of Split-Hopkinson Pressure Bar Apparatus to Investigate High Strain Rate Mechanical Behavior of Low Carbon Steel. |
Dr A.A.G.A Abeygunawardane |
|
Designing of Rubber based Strain Sensor as a Vehicle Tire Performance Indicator |
Mr V.S.C Weragoda |
|
Determine the Relationship between Corrosion Rate and Grain Size of Low Carbon Steel |
Mr V. Sivahar |
|
Double Layer Capacitor Based Model for Super Capacitors |
Dr. S. Amarasinghe |
|
Electrode - Electrolyte Interface Analysis by Molecular Dynamic Simulation |
Dr.(Mrs).H.S Sitinamaluwa |
|
Evaluation of Performance of Modified Graphene based Materials in Latex Films |
Dr.(Mrs).N.M.V.K. Liyanage |
|
Evaluation of Performance of Modified Graphene based Materials in Tire Tread Formulations |
Dr.(Mrs).N.M.V.K. Liyanage |
|
Investigation of Electrical Properties of Micro Crystalline Cellulose based Composite Materials |
Mr. A.M.P.B. Samarasekara |
|
Investigation of Thermo-Mechanical Behaviour in Polymer based Mallet Compound with Graphite |
Dr A.A.G.A Abeygunawardane |
|
Measurement of Long Term Force Decay in Rubber Components |
Mr V.S.C Weragoda |
|
Measurement of Steady State Thermal Conductivity of Rubber Compounds |
Mr V.S.C Weragoda |
|
MIE-Theory-based Investigation of the Effect of Size Distribution on the Surface Plasmon Absorption of Silver Nano Particles |
Mr. A.M.P.B. Samarasekara |
|
Modeling and Validation of Nano Hydroxyappetite formation for Medical Applications |
Prof. S.U Adikari |
|
Modeling of Laser Assisted Thermal Reduction of Graphene Oxide for the Development of a Strain Gauge |
Dr.D. Attygalle |
|
Modelling of Micro Size Ultrasonic Generator and Receiver Characteristics of Lead Zirconate Titanate and Polyvinylidene Fluoride using Finite Element Analysis |
Prof. S.U Adikari |
|
Modelling the Mechanical Behavior of Micro Crystalline Cellulose based Polymer Composites |
Mr. A.M.P.B. Samarasekara |
|
Natural Dye Extraction From Lane Areca |
Mr S.V. Udayakumara |
|
Non-Destructive Monitoring of Fruit Ripening |
Dr. S. Amarasinghe |
|
Quality Control of Manufactured Tires Through Non-Destructive Test |
Mr V. Sivahar |
|
Simulation and Analysis of Effect of Halide Ions of Perovskite on Perovskite Solar Cells Performance |
Dr.(Mrs).A.S Galhenage |
|
Simulation Study on the Insulation Properties of Cotton Fibre –LDPE Composite |
Mr S.V. Udayakumara |
|
Suitability of Using Aruwakkalu Limestone and Ship Blasting Sand to Produce Paving Blocks Used in Roads |
Eng. S.P Guluwita |
|
Use of Aruwakkalu Sand for Medium Strength Concrete |
Eng. S.P Guluwita |