Undergraduate Projects
Final Year Projects by undergraduates of the DMSE
Final Year Projects by Year
Final Year Projects - Intake 2018
Total topics: 26 ▾
| Project Title | Supervisor |
|---|---|
| Development of advanced polymer composites using natural resins | Mr. AMPB Samarasekara |
| Development of cellulose based nano-fibers by electrospinning techniques | Mr. AMPB Samarasekara |
| Development of open-source software for polymer composites analysis | Mr. AMPB Samarasekara |
| Extraction of natural dyes from selected plant sources and its application in fabrics | Mr. SV Udayakumara |
| Development of new bio-based adhesive for paper/cardboard | Mr. SV Udayakumara |
| Preparation and characterization of LDPE based wood-plastic composites reinforced with clay | Mr. SV Udayakumara |
| Preparation of high-quality graphene oxide from Sri Lankan vein graphite | Dr. HS Sitinamaluwa |
| Activated graphene oxide for removal of organic pollutant from wastewater | Dr. HS Sitinamaluwa |
| Optimization of the extraction of Nano CaO powder from eggshells for agricultural applications | Prof. AS Galhenage |
| Synthesis of fluoride-containing varnish for application to the tooth surface | Prof. AS Galhenage |
| Development of petroleum oil quality analyser based on optical metrological techniques | Dr. D Attygalle |
| Influence of particle size on biocompatibility of hydroxyapatite nanoparticles | Prof. SU Adikary |
| Numerical optimization of band gap gradient of CIGS solar cell | Dr. D Attygalle |
| Modeling and simulation of solid-state micro-pump based on piezoelectric ceramics | Prof. SU Adikary |
| Modeling and simulation of piezoelectric nanogenerators based on nanowire arrays | Prof. SU Adikary |
| Development of an exhaled breath analyzer for early detection of diseases | Dr. DAS Amarasinghe |
| Studying the effect of aging temperature and quenching medium on the hardness of AL6063 alloy | Dr. GIP De Silva |
| Development of low-cost bricks using waste foundry dust | Dr. GIP De Silva |
| Estimation of Weibull modulus through ultrasonic velocity measurements | Mr. V Sivahar |
| Monitoring of FRP degradation with ultrasound | Mr. V Sivahar |
| Dynamic mechanical analysis of elastomers | Mr. VSC Weragoda |
| Measurement of effective heat transfer in elastomers | Mr. VSC Weragoda |
| Conductive elastomeric sensors | Mr. VSC Weragoda |
| Numerical prediction of curing status of graphite-based tire compounds under vulcanization | Dr. AAGA Abeygunawardane |
| Suitability of using Al sludge waste to produce paving block | Mr. SP Guluwita |
| Suitability of extracting aluminium from aluminium sludge waste | Mr. SP Guluwita |
Final Year Projects - Intake 2017
Total topics: 23 ▾
| Project Title | Supervisor |
|---|---|
| Characterization of the Deformation and Damage of Biological Soft Tissues for Tissue Engineering | Dr. AAGA Abeygunawardane |
| Preparation and Characterization of Porous Graphene from Sri Lanka Vein Graphite | Dr. (Mrs) HS Sitinamaluwa |
| Development of Nano-Cellulose based Respirator Filters | Mr. AMPB Samarasekara |
| Quantitative Estimation of Residual Stresses in Quenched Steel through Ultrasonic Parameters | Mr. V Sivahar |
| Modelling of Cement – Waste Paper – Natural Fiber based Composite for Ceiling Sheet/Partition Board | Mr. SV Udayakumara |
| Numerical simulation of Lead-Free bismuth perovskite using SCAPS | Dr. AS Galhenage |
| Characterization of Viscoelastic Materials by Ultrasonic Transmission Technique | Mr. V Sivahar |
| Environmental Corrosion on Structural Steel | Eng. S.P Guluwita |
| Nitrogen doped Graphene for Energy Storage | Dr. (Mrs) HS Sitinamaluwa |
| Modelling, Optimization and Design of Efficient Piezoelectric Energy Harvesting Device to Power Wearable Electronics | Prof. S.U Adikari |
| Design and Fabrication of Bi-Axial Tensile Testing Machine to Characterize Polymer Composite | Dr. AAGA Abeygunawardane |
| A Cure Monitoring Method Development for Adhesives using Direct Current Resistivity | Mr. V.S.C Weragoda |
| Development of Magnetic Traceability Sensor | Dr. D Attygalle |
| Synthesis of Nano-Calcium Oxide from Eggshell for Dental Applications | Dr. (Mrs) A.S Galhenage |
| Extraction of Copper and Sand from Blasting Sand | Eng. S.P Guluwita |
| Study on Plasma based Printability Improvement | Dr. DAS Amarasinghe |
| Design of a Bridge Expansion Joint | Mr. V.S.C Weragoda |
| Simulation Study on the Effect of Fillers on the Mechanical Properties of Thermoplastics | Mr. SV Udayakumara |
| Development of Soil Based Composite Wall Panels Using Locally Available Laterite Soil | Dr. D Attygalle |
| Design and Optimization of Linear Actuator for Biomedical Applications | Prof. S.U Adikari |
| Characterization of Cu/Ni(Mn) Foil used in Strain Gauge Industry | Mr. V.S.C Weragoda |
| Synthesizing and Characterization of Composites with Palmyrah Leaf Petioles as Construction Materials | Eng. S.P Guluwita |
| Explore the suitability of M-sand sludge waste in the production of paving blocks and its mix design | Eng. S.P Guluwita |
| Optimization of process parameters to improve the tensile strength of Aluminum alloy 6201 | Eng. S.P Guluwita |
Final Year Projects - Intake 2016
Total topics: 24 ▾
| Project Title | Supervisor |
|---|---|
| Design of Natural Fiber and Waste Paper Composite using Numerical Analysis Method | Mr. S.V. Udayakumara |
| Design and Fabrication of Split-Hopkinson Pressure Bar Apparatus to Investigate High Strain Rate Mechanical Behavior of Low Carbon Steel | Dr. A.A.G.A Abeygunawardane |
| Designing of Rubber based Strain Sensor as a Vehicle Tire Performance Indicator | Mr. V.S.C Weragoda |
| Determine the Relationship between Corrosion Rate and Grain Size of Low Carbon Steel | Mr. V. Sivahar |
| Double Layer Capacitor Based Model for Super Capacitors | Dr. S. Amarasinghe |
| Electrode - Electrolyte Interface Analysis by Molecular Dynamic Simulation | Dr. (Mrs) H.S Sitinamaluwa |
| Evaluation of Performance of Modified Graphene based Materials in Latex Films | Dr. (Mrs) N.M.V.K Liyanage |
| Evaluation of Performance of Modified Graphene based Materials in Tire Tread Formulations | Dr. (Mrs) N.M.V.K Liyanage |
| Investigation of Electrical Properties of Micro Crystalline Cellulose based Composite Materials | Mr. A.M.P.B Samarasekara |
| Investigation of Thermo-Mechanical Behaviour in Polymer based Mallet Compound with Graphite | Dr. A.A.G.A Abeygunawardane |
| Measurement of Long Term Force Decay in Rubber Components | Mr. V.S.C Weragoda |
| Measurement of Steady State Thermal Conductivity of Rubber Compounds | Mr. V.S.C Weragoda |
| MIE-Theory-based Investigation of the Effect of Size Distribution on the Surface Plasmon Absorption of Silver Nano Particles | Mr. A.M.P.B Samarasekara |
| Modeling and Validation of Nano Hydroxyapatite Formation for Medical Applications | Prof. S.U Adikari |
| Modeling of Laser Assisted Thermal Reduction of Graphene Oxide for the Development of a Strain Gauge | Dr. D. Attygalle |
| Modelling of Micro Size Ultrasonic Generator and Receiver Characteristics of Lead Zirconate Titanate and Polyvinylidene Fluoride using Finite Element Analysis | Prof. S.U Adikari |
| Modelling the Mechanical Behavior of Micro Crystalline Cellulose based Polymer Composites | Mr. A.M.P.B Samarasekara |
| Natural Dye Extraction From Lane Areca | Mr. S.V. Udayakumara |
| Non-Destructive Monitoring of Fruit Ripening | Dr. S. Amarasinghe |
| Quality Control of Manufactured Tires Through Non-Destructive Test | Mr. V. Sivahar |
| Simulation and Analysis of Effect of Halide Ions of Perovskite on Perovskite Solar Cells Performance | Dr. (Mrs) A.S Galhenage |
| Simulation Study on the Insulation Properties of Cotton Fibre – LDPE Composite | Mr. S.V. Udayakumara |
| Suitability of Using Aruwakkalu Limestone and Ship Blasting Sand to Produce Paving Blocks Used in Roads | Eng. S.P Guluwita |
| Use of Aruwakkalu Sand for Medium Strength Concrete | Eng. S.P Guluwita |